Commercial · Sarasota, FL
Concrete curb and gutter work controls runoff, protects pavement edges, and keeps parking lots and drives from raveling out. Sarasota Concreters builds and replaces formed curb and gutter sections with proper base, steel reinforcement, and clean transitions for asphalt and concrete tie-ins.
Good curb and gutter starts below grade. We sawcut and remove failed concrete, then excavate to the required depth and compact the subgrade with a plate compactor or jumping jack. A stabilized base (typically 4-6 inches of FDOT limerock or crushed concrete) is graded to line and elevation, then compacted to limit settlement. We set stringlines and laser levels, pin and brace steel or wood forms, and confirm flow to inlets before any concrete is ordered.
Florida rain events and sandy soils make drainage details and finishing matter. We shape the gutter pan and curb reveal to move water where it should go, then place concrete with the right slump for curb forms and consolidation. Expansion joints and control joints are installed at proper spacing and at tie-ins, and we dowel into adjoining slabs when needed to reduce differential movement. Finishes are selected for function, including broom-finish for traction, smooth steel trowel where specified, and clean tooled edges to resist chipping.
Sarasota customers choose us because we treat curb and gutter as drainage infrastructure, not just a cosmetic border. We handle layout, grades, and radii for returns, driveway aprons, parking lot islands, and dumpster pads, and we coordinate around utilities and existing storm structures. Our crews use stakes, pins, and form hardware that holds line, and we place reinforcement such as #3 or #4 rebar or welded wire mesh when the application calls for it. You get a clear plan, a written scope, and a job that is kept neat and safe for residents, customers, and deliveries.
Before we demobilize, we walk the site with you to confirm elevations, water flow, joint locations, and tie-ins to asphalt or existing concrete. We explain curing and protection, including keeping traffic off the new curb and gutter until it reaches adequate strength, and we can schedule sawcut control joints if specified. Your finished package includes removal and haul-off, properly compacted base, formed and poured concrete curb and gutter, tooled edges, joints, cleanup, and straightforward maintenance guidance. If the project needs permit coordination or phased access for businesses, we plan that up front so the site stays usable.
Yes. We provide a free written estimate with scope details such as demo, base prep, reinforcement, concrete strength, finish type, and jointing.
Yes. We handle saw-cutting, demolition, and haul-off, then rebuild the base and forms before placing new concrete.
When permits are required, we can coordinate the scope and documentation needed and work with inspectors during the project timeline.
Common finishes include broom-finish for traction, smooth trowel where appropriate, and decorative stamped and stained concrete with sealing options.
In many cases, yes. We assess the cause and recommend repair methods such as removal and replacement, patching, or re-pouring sections to restore safe elevations and slope.
A properly built concrete curb and gutter system does more than define an edge, it directs stormwater, protects asphalt and slab edges from unraveling, and reduces erosion where water concentrates. Sarasota Concreters installs new and replacement concrete curb and gutter for commercial lots, multifamily properties, and residential drive approaches, focusing on correct grades, stable base preparation, and durable joints so the work performs through heavy rain and daily traffic.
Concrete curb and gutter is typically formed in place, with braced forms set to the required line, radius, and reveal. After removal of failed sections and excavation, we place and compact base material, verify elevations, and install reinforcement when specified. During the pour, concrete is consolidated and shaped to maintain a smooth gutter pan and consistent curb face, then finished for the intended use, such as broom-finish in pedestrian areas. Control joints and expansion joints are installed to manage cracking and movement, especially at returns, tie-ins, and changes in direction.
In Sarasota’s wet-season conditions, drainage performance is the priority. We confirm that water has a continuous path to existing inlets or swales and avoid low spots that pond. For parking lots and entrances, we build transitions that keep tires and carts from catching edges, and we can coordinate phased pours to maintain access for tenants and customers. If your project includes curb ramps, driveway aprons, or connections to sidewalk and slab work, we align elevations so the finished site drains correctly and looks clean.
If you need a concrete curb and gutter replacement or new installation, we will review your site, measure the runs, and provide a written scope that matches how the area is used. You will know what is being removed, how the base will be rebuilt, where joints will go, and how we will protect and cure the concrete. Call Sarasota Concreters to schedule a free written estimate and get a curb and gutter system that holds grade and moves water reliably.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Sarasota. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
